Residential Artificial Turf in Orange County

Residential turf at Go Turf means more than a single zone. It’s whole-home projects that coordinate your front yard, backyard, side yards, pet area, and putting green into one install with one crew, one schedule, and one warranty. If you’re thinking about turfing one part of your property, the question that comes up most often is: do we do the rest now, or in a phase?

Pricing starts at $7.49 per square foot installed. Whole-home projects are backed by a 3-year labor warranty plus the manufacturer’s warranty across all zones. Call (970) 274-0100 or request a free on-site quote.

RESIDENTIAL

What "Residential" Means at Go Turf

Most OC homeowners don’t realize the typical project we quote is actually two or more zones, not one. Front yards get UV-stable turf with clean curb transitions. Backyards get a family-grade polyethylene blend. Pet zones get high-drainage backing with antimicrobial infill. A putting surface gets short-pile high-density golf turf. These are different products serving different uses – and the right project coordinates them all.

When we say “residential artificial turf,” we mean the full home: every grass area on your property, spec’d zone by zone, installed in one project or phased on your schedule.

WHOLE-HOME CONFIGURATIONS

Common Whole-Home Configurations

Front Plus Back

The two largest grass areas are converted into one. Maximum water savings, maximum curb appeal lift, single crew mobilization. Most common configuration in the 1,000 – 2,500 sq ft total scope range. See front yard artificial turf and backyard artificial turf for zone-specific specs.

Backyard Plus Pet Zone

Family lawn area in landscape turf, dedicated dog run or side yard in pet-specific turf. Different products, different specs, integrated in one design. Standard configuration for pet households across Yorba Linda, Mission Viejo, and Anaheim Hills. See artificial grass for dogs for the pet zone specs.

Full Perimeter

Front, back, both side yards, and any unused grass strips converted. Eliminates irrigation across the entire property. Most efficient per-square-foot pricing in our project mix because mobilization and base prep are amortized.

Multi-Zone With Different Specs

The most comprehensive Go Turf project: a front yard with curb appeal-optimized turf, a backyard family lawn with HydroFill cooling, a pet zone with antimicrobial infill, and an integrated putting green – all in one coordinated install.

PRICING

Pricing for Whole-Home Installs

Larger projects amortize fixed costs (mobilization, crew day-rate, equipment) across more square footage, so per-foot pricing drops as scope grows.
Project ScopeTypical Total RangePer-Foot Range
Front plus back (800 – 1,500 sq ft)$7,500 – $18,000$9 – $15
Backyard plus pet zone (600 – 1,200 sq ft)$6,000 – $15,000$10 – $15
Full perimeter (1,500 – 3,000 sq ft)$13,500 – $33,000$9 – $13
Multi-zone with putting green (1,500 – 2,500 sq ft)$18,000 – $45,000$12 – $20
Turf plus pavers (full home)$25,000 – $80,000+Scope dependent

Final pricing depends on base condition, drainage requirements, turf grade per zone, infill choices, and any hardscape integration. Request a free itemized estimate.

DIFFERENCE

Single-Project vs Phased Approach

Whole-home turf is often a phased project on a homeowner’s schedule rather than a single push. Common phasing:

Phase 1

Front yard (highest curb-appeal impact)

Phase 2

Backyard family lawn

Phase 3

Pet zone or putting green

Phasing lets you spread the investment over months or years. The trade-off: each phase carries its own mobilization cost. Single-project installs are usually 10 – 20% less expensive per square foot than the same scope phased over multiple visits. We’ll quote both options at the consultation.

STRATEGY

Multi-Zone Spec Strategy

Different zones need different products. The reason whole-home projects benefit from a brand-neutral installer is that no single product is right for every zone. Our typical spec across a multi-zone install:
Collage of two outdoor yard scenes: top left shows a tree-shaded backyard with a person using a leaf blower on a circular green lawn; bottom right shows a modern patio with stepping-stone paths and outdoor seating by a glass-door house.
EVERYTHING YOU GET WITH GO TURF

What’s Included in Every Whole-Home Install

Free on-site consultation

with a Go Turf team member

Multi-zone design and product recommendation

HOA documentation packet

if required

Full base prep across every zone

Premium turf

from Tiger Turf, Imperial Synthetic Turf, or Everlast

Specialty infill

matched to each zone’s use

Seamless joins and galvanized edge restraints

3-year labor warranty

plus manufacturer warranties
INSTALLATION

Installation Timeline

Project Scope

Timeline

Front yard only (under 700 sq ft)

1 – 2 days

Front plus back (under 1,500 sq ft)

2 – 3 days

Full perimeter (1,500 – 3,000 sq ft)

3 – 5 days

Multi-zone with putting green or pavers

5 – 7 days

Phased install

Per phase, by scope

FAQS

Frequently asked questions

What Counts as a Residential Install at Go Turf?

Any project on a single-family or multi-family residential property. In practice, the largest residential projects we install cover the full home – front, back, side yards, pet zones, and any putting green or play surface – in one coordinated scope.

Do I Have to Do the Whole Home at Once?

No. We’re equally happy to install one zone now and the rest later. About half our residential clients do single zones; about half do multi-zone or phased projects. Phasing costs slightly more per square foot but spreads the investment.

Can Different Zones Use Different Turf Products?

Yes. This is one of the main reasons multi-zone projects benefit from a brand-neutral installer. Your front yard, backyard, and pet zone don’t need the same product, and forcing them to match usually means compromising on one. We spec each zone independently.

How Long Do Residential Installs Take?

Single-zone installs typically take 1 – 2 days. Two-zone projects 2 – 3 days. Full home (3+ zones) 3 – 7 days. Multi-zone projects with paver integration or large square footage can extend to 7 – 10 days. Schedule is locked at estimate.

How Much Does a Whole-Home Residential Install Cost?

Pricing starts at $7.49 per square foot. Whole-home projects typically run $9 – $15 per foot because fixed costs amortize across a larger area. A typical 2,000 sq ft full-home conversion runs $18,000 – $30,000. Multi-zone with putting green or full hardscape integration runs higher.

Do You Handle HOA Approvals for Multi-Zone Installs?

Yes. We provide a single HOA submittal packet covering all proposed zones. Most OC HOA reviews approve multi-zone proposals together rather than zone-by-zone, which is faster than separately submitting each.

Ready for a Quote?

Free on-site quote. Owner-led consultation. No high-pressure sales.
Call Now